Home - Products - Special Line - Anticorrosion Line - Epofind AM/88 HS
Epofind AM/88 HS

Epofind AM/88 HS


Code: 5G6534

High performance two component high thickness epoxy coating for internal and external coating of pipes and tanks, highly resistant to corrosion and chemicals.

Two component high thickness epoxy coating specifically formulated for internal/external application of pipelines and tanks carrying chemicals (e.g. oils, sulphurous products,
waste water, etc. Provides excellent adhesion to the substrate and outstanding corrosion resistance in service conditions. Withstanding temperatures of 60-70°C in  service conditions.

Paint Type Two components
Binder type A Epoxy resin
Binder type B Amino phenol
Solids content (volume) ±2 65%
Viscosity Ford ø 8 at 20°C ±2 Tixotropico
Shelf life +23°C (±2) 24 months in unopened cans
Application Brush-Roller-Spray
Mixing ratio A+B by volume 3,5 parts of Sol.A wih of Sol. B
Brush-Roller 10-15% Thinner 765
Spray 10-20% Thinner 765
Touch dry Touch dry in 1h, Dry in 8h
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 125 dry microns per coat
Theoret. coverage m2/Lt 5 m2/lt

Color code: 5G6534


Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.


The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.