Enamels
Home - Products - Marine Line - Professional Line - Enamels - Smalto Motori Marini
Smalto Motori Marini

Smalto Motori Marini

pdf-icon
Code: MM0

It is a fast drying enamel providing a gloss finish, withstanding service temperatures of marine engines, oils, diesel and salt water. Available in the most common colours of marine engines.

SURFACE PREPARATION AND RECOMMENDED COATING SYSTEM

Bare steel new surfaces. Degrease the substrate and apply one primer coat of EPOFOND AM-9 by spray or by brush. Let dry for 12-24 hours and apply one coat of SOLVER PRIMER by spray or by brush. Let dry for 12-24 hours and overcoat with 1-2 coats of SMALTO MOTORI MARINI in the desired shade as per colours available.

Painted surfaces. Remove all loose parts by wirebrushing or by means of paint remover or by sanding. Degrease the surface and sandpaper the existing paint. Apply 1 or 2 coats of SOLVER PRIMER all over the surface (both on old paint and over parts brought back to bare steel). Let dry for 12-4 hours and apply 1-2 coats of SMALTO MOTORI MARINI in the desired shade as per colours available.

In case it is only required to refresh the old finish just because dirty or dull but still with good adhesion properties and free from cracking or loose parts, sandpaper and apply directly 1-2 coats of SMALTO MOTORI MARINI in the desired shade as per colours available.
 

Paint Type One component
Binder type A Chlorinated-alkyd
Specific gravity kg/lt (±0,05) 1.100-1.300 depending on the colour
Solids content (volume) ±2 50%
Shelf life +23°C (±2) 30 months in unopened cans
Viscosity Ford (Ø4 a 20°C) 120-125 sec.
Brush-Roller Brush (touch ups) 10-15% Thinner 400
Spray Standard colours: 20-30% Thinner 400 - Metallic colours: 30-40% Thinner 765
Touch dry 2-4 h (20°c)
Recoat time 12-24 hours
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 40 microns per coat
Theoret. coverage m2/Lt 10-12

Colors: BIANCO
Color code: MM0080

Colors: BLU METALL. NANNI
Color code: MM0124

Colors: BLU VM
Color code: MM0122

Colors: BMW SILVER
Color code: MM0132

Colors: GIALLO CATERPILLAR
Color code: MM00111

Colors: GIALLO VETUS
Color code: MM0110

Colors: GRIGIO MET YANM
Color code: MM0130

Colors: NERO MERCURY
Color code: MM0070

Colors: NERO VOLVO
Color code: MM0710

Colors: ROSSO AIFO
Color code: MM0150

Colors: ROSSO VOLVO
Color code: MM0151

Colors: VERDE VOLVO
Color code: MM0174

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.