K.O. is a washable wall paint formulated with highly effective anti-mould salts, for use in the harshest conditions while providing long-term protection of surfaces from mould, fungus and bacteria. This product is particularly suitable for areas which are prone to mould development, and difficult to remove with common treatments such as all those work environments that are subject to high condensation and humidity (e.g.bakeries, dairies, butcher's shop, swimming pools, etc.) When used in combination with Lindos DFT 16 this product represents a long lasting protection system against development of mould, fungus etc. keeping the premises hygienically healthier. K.O. is suitable for contact with foodstuff of V class (Min.Dec.of 21/03/73).
SURFACE PREPARATION AND APPLICATION
Walls affected by mould. Apply direct one coat of LINDOS DFT16 onto the areas affected by mould as well as to the closest areas in order to eliminate also the spores which may have laid down on the surface. Let stand for 24 hours and wirebrush the surface to remove the passivated moulds and all loose paint. Repeat the treatment if necessary. When the surface is dry apply one coat of ISOLFIX previously mixed with 10% of LINDOS DFT16. Let dry for 24 hours and apply 2 coats of K.O. allowing 24 hours between coats.
Previously Coated Walls. Any loose or powdery old paint should be removed by wirebrushing. If necessary apply on a clean and dry surface a primer coat of water-based selaer (ISOLFIX). Overcoat with two coats of K.O. allowing the required waiting period between coats. If the old paint is in good conditions, apply 2 coats of K.O. directly allowing the required waiting period between coats.
Paint Type | Water-based one-component paint |
Binder type A | Vynil |
Specific gravity kg/lt (±0,05) | 1.500 White |
Solids content (weight) ±2 | 65% |
Viscosity Ford ø 8 at 20°C ±2 | 27±3 sec. |
Shelf life +23°C (±2) | 30 months in unopened cans |
Note | Store in a dry and cool place. Do not store at low temperatures. |
Application | Brush-Roller-Spray |
Brush-Roller | 30-50% with water |
Spray | 15-30% with water |
Touch dry | 60 minutes ( 20°c) |
Dust dry | 15-20 minutes (20c) |
Recoat time | 12-24 h |
Relevant humidity | Less than 80% |
Dry film thickness advised | 40-45 dry microns |
Theoret. coverage m2/Lt | 8-10 |
Colors: BIANCO
Color code: 1E0000
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.