Home - Products - Marine Line - Yachting Line - Star Teak Line - Star Teak detergente (Cleaner)
Star Teak detergente (Cleaner)

Star Teak detergente (Cleaner)

pdf-icon

Code: 6D6414

Alkaline based concentrated detergent solution for the cleaning of teak decks of boats and for other untreated surfaces onboard. Removes the ingrained dirt (salt, oil and grease stains), restoring the original colour of wood. STAR TEAK CLEANER is part of the Star Teak Line, also including Star Teak Brightener and Star Teak Sealer.

SURFACE PREPARATION AND APPLICATION PROCEDURE

TEAK WOOD. Wet the wood surface with fresh water and apply STAR TEAK DETERGENTE (Cleaner) evenly all over the surface, diluted with 3 or more parts of water. Let it stand for few seconds, then brush vigorously the surface and finally rinse with plenty of fresh water.  (Do not use metal wirebrushes since their particles could stain wood by oxidation).

Note. In case after the cleaning procedure it should be necessary to brighten the colour of wood or remove any grey or blackish shade caused by ageing, then use STAR TEAK SBIANCANTE (Brightener).

 

Paint Type degreaser
Binder type A Alcaline
Specific gravity kg/lt (±0,05) 1.067
Shelf life +23°C (±2) 30 months in unopened cans
Note Ph: 13 ± 1
Application Brush
Brush-Roller 1 part of product with 3 or more parts of fresh water
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%

Colors: INCOLORE
Color code: 6D6414

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.