Home - Products - Marine Line - Yachting Line - Resins & Gelcoat - Eposealer Incollaggio
Eposealer Incollaggio

Eposealer Incollaggio


Code: G44201

EPOXY BONDING RESIN .Two-component epoxy liquid resin, free from solvents, hardened with cicloaliphatic ammine to provide high adhesion and sealing power. Used for gluing wood to wood, wood to fibreglass or fibreglass to fibreglass. It should be applied at temperature above 10°C.


Clean, degrease and if possible sanpaper the substrated to be glued, which should be solid and in good conditions. Mix the two components in the ratio of 2 parts of Sol.A with 1 part of Sol.B by volume, stir thoroughly for a few minutes. Then apply by brush or by a dented spatula the product onto both parts to be glued. Stick the two parts and hold firmly together with a clamp. Curing process starts after 3-4 hours and will be completed after approx. 7 days (after this period the structural performance will be definitive).

Paint Type Two components
Binder type A Liquid epoxy resin
Code & colour A G44201
Code & colour B 8Z6026
Specific gravity kg/lt (±0,05) 1.136 (A) - 0.970 (B)
Viscosity Ford ø 8 at 20°C ±2 12 sec. (Ø8 a 20°C)
Shelf life +23°C (±2) 30 months in unopened cans
Application Brush-Roller
Mixing ratio A+B by volume 2 parts Sol.A with 1 part Sol.B
Pot life A+B (20°C) Use mixture within 30-50 minutes
Brush-Roller Ready to use
Curing time 7 days
Recoat time 24 h ( 20°)
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 100 microns per coat
Theoret. coverage m2/Lt 5

Colors: NEUTRO
Color code: G44201


Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.


The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.