Epoxy satin primer for steel, brass, cast-iron and light alloys. Specifically applied as a primer on propellers, flaps and cast-iron bulbs, provides an excellent anchor pattern and long lasting anticorrosion barrier. The product is overcoated with antifouling CONTENDER ELICHE.
SURFACE PREPARATION AND APPLICATION PROCEDURE
Propellers, stern drives, flaps and cast-iron bulbs.
The substrate should be perfectly cleaned, dry, degreased and mechanically sanded. Apply a first coat of ELIPRIMER 2C (25-30 dry microns) thinned 30% with Thinner 765*. After 12-24 hours apply a second coat of ELIPRIMER 2C (30-40 dry microns) thinned 20-25% with Thinner 765*. Let dry for minimum 12. hours and overcoat with two coats of antifouling CONTENDER ELICHE allowing the required waiting time between coats.
*It is necessary to dilute separately the Sol. A before adding the activator Sol.B. Once the Sol.A has been diluted add the activator Sol.B in the correct ratio specified and let stand the mixture for 10-15 minutes before starting application.
| Paint Type | Two components |
| Binder type A | Epoxy |
| Binder type B | Polyammide |
| Code & colour A | 5GBC.White |
| Code & colour B | 8ZAM9B Transparent |
| Specific gravity kg/lt (±0,05) | 1,370 (A) - 1,020 (B) |
| Solids content (volume) ±2 | 37% |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Viscosity Ford (Ø4 a 20°C) | 120-150 sec. (20°C) A+B |
| Application | Brush-Roller-Spray |
| Mixing ratio A+B by volume | 4 parts Sol. A with 1 Sol. B |
| Pot life A+B (20°C) | use within 6-8 hours |
| Brush-Roller | 20-30% Thinner 765 |
| Spray | 20-30% Thinner 765 |
| Touch dry | 2 h ( 20°c) |
| Recoat time | 12-24 h ( 20°c) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 30-40 microns per coat |
| Theoret. coverage m2/Lt | 8-9 |
Colors: BIANCO
Color code: 5GBC00
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
Seguici su
Tel:
Fax:
Email -
PEC -
© Aemme Colors 2022 - All rights reserved.
Cookie Policy - Privacy Policy