Two-pack epoxy-coating formulated with high content of metal zinc. Used as a protective primer for sandblasted metal structures immersed in the water or exposed to weather. Also used as a primer for cold galvanizing. EPOZINC 2C must be applied within 6 hours from sandblasting. The product can withstand dry temperature of 250°C.
SURFACE PREPARATION AND APPLICATION PROCEDURE
Steel. Sandblasting according to SA 2,5 is necessary before application of EPOZINC 2C. Apply EPOZINC 2C within 6 hours from sandblasting, in accordance with our thinning directions and overcoat with the recommended coating system.
| Paint Type | Two components |
| Binder type A | Epoxy |
| Binder type B | Polyammide |
| Specific gravity kg/lt (±0,05) | 2,940 (A) - 0,920 (B) |
| Solids content (weight) ±2 | 85% |
| Solids content (volume) ±2 | 27% |
| Viscosity Ford ø 8 at 20°C ±2 | 60-80 sec. (Ø4 a 20°C) |
| Shelf life +23°C (±2) | |
| Viscosity Ford (Ø4 a 20°C) | 60-80 sec. (20°C) |
| Application | Brush-Roller-Spray |
| Mixing ratio A+B by volume | 85 parts Sol. A with 15 Sol. B |
| Mixing ratio A+B by weight | 95 parts Sol. A with 5 Sol B |
| Pot life A+B (20°C) | use within 4-6 hours |
| Brush-Roller | 10-15% Thinner 765 |
| As a primer on bare wood* | 25-35% Thinner 765 |
| Spray | 25-35% Diluente 765 |
| Dust dry | 30 minutes (20c) |
| Recoat time | 12 h (20°c) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 40 microns per coat |
| Theoret. coverage m2/Lt | 13 ( 4,5 m2/kg ) |
Colors: GRIGIO
Color code: 5J0000
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
Seguici su
Tel:
Fax:
Email -
PEC -
© Aemme Colors 2022 - All rights reserved.
Cookie Policy - Privacy Policy