Extra-light glass microspheres entirely of mineral composition (glass-boron-silicate) made of very tiny transparent bubbles of round shape and waterproof available in powder form. This product is mostly used as a light thickening agent (its specific gravity is 100 gr per liter) for epoxy and polyester resin with the purpose to obtain a low density and low cost assembled products. Microcel is added directly into the activated resin in the percentage of 60-80% by volume. Its addition lowers considerably the specific weight of the mixture and represents the ideal product for filling purposes.
FIRE RESISTANCE:The complete mineral composition makes of this product a non-combustible material
RESISTANCE TO CHEMICAL AGENTS:The product withstands weather agents, organic solvents and all commonly used acids and relevant vapours with the exception of hydrofluoric acid.
RESISTANCE TO BIOLOGICAL AGENTS:The product does not rot and is resistant to insects and rodents.
PRECAUTIONS: The product is not toxic although a continuous inhalation should be avoided as well as any contact with the eyes. A protective anti-dust mask and googles should be used during application. In case of contact with eyes wash immediately with plenty of water and seek medical help at once. In case of contact with skin just wash the contaminated part with fresh water and soap. If inhalated breathe in the open air.
| Shelf life +23°C (±2) | Unlimited |
Colors: IN POLVERE
Color code: 7T6047
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
Seguici su
Tel:
Fax:
Email -
PEC -
© Aemme Colors 2022 - All rights reserved.
Cookie Policy - Privacy Policy