enamels
Home - Products - Marine Line - Yachting Line - enamels - Idrodrop
Idrodrop

Idrodrop

pdf-icon
Code: 1C0000

Water-diluted, anti-condensation product of low conducibility, particularly suitable to withstand mould growth due to condensation originated by external-internal temperature changes. Suitable for all substrates provides thermo-insulating characteristics (applied at 1000 microns) and sound-deadener properties (applied at 2000 microns); it is also recommended for interior of yachts where all such features may be required.

SURFACE PREPARATION AND APPLICATION PROCEDURE 

Wood, Plastics, Aluminium,Steel. The substarte should be necessarily pre-treated with a suitable primer, according to the different type of material to be coated. Sheet iron surfaces should be degreased with suitable solvent. Apply two coats of IDRODROP at the required thickness allowing the recommended waiting time between coats.

New Plastered Walls. The substrate should be pre-treated with a water-based sealer (e.g. ISOLFIX) or a solvent based sealer (e.g. FIXACRIL). Overcoat with two coats of IDRODROP at the required thickness allowing the recommended waiting time between coats.

Previously Coated Walls. The old paint should be in good condition of adhesion, cleaned and sanded. A small patch test is recommended to verify the compatibility of IDRODROP with the old paint. Traces of mould should be removed by Lindos DFT16. Overcoat with two coats of IDRODROP at the required thickness allowing the recommended waiting time between coats.

Paint Type Water-based one-component paint
Binder type A Acrylic stirene emulsified
Specific gravity kg/lt (±0,05) 0.950
Solids content (volume) ±2 62%
Viscosity Ford ø 8 at 20°C ±2 Brookfield: 30.000±3.000 cps
Shelf life +23°C (±2) 30 months in unopened cans
Note Keep in a cool and dry place. Do not store at low temperatures.
Viscosity Ford (Ø4 a 20°C) Brookfield: 30.000±3000 cps
Application Brush-Roller-Spray
Brush-Roller 0-15% witht water (high thickness)
Spray 20-30% with water (nozzle Ø2)
Recoat time 6-24 hours depending on thickness
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Thickness (anti-condens.) 1000 dry microns
Thickness (sound deaden.) 2000 dry microns
Theoret. coverage m2/Lt 0,7 for 500 dry microns

Colors: BIANCO
Color code: 1C0000

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.