Self-polishing antifouling, based on acrylate and copper copolymers. Offers excellent antifouling power and high performance in alternating use conditions. It is formulated to have a controlled release of antifouling salts * and the consumption of the product film, which allow it to last for several years (depending on the thicknesses applied). It is suitable for large boats, mega yachts and sailboats. (*) These biocidal substances bind the use of this product exclusively on a Professional level.
PREPARATION OF THE SUPPORT AND APPLICATION CYCLE
New hulls in iron. Apply 2-3 coats of EPOFOND AM / 9 on sandblasted iron at grade 2-2.5 at intervals of no more than 24 hours from each other (at least 6-8 hours), then 2 coats of MAKO antifouling at a distance of at least 12 hours apart
New wooden hulls. Apply a coat of CROMOMINIO-AT widely diluted. Follow with two coats of SOLVER PRIMER, leaving 24 hours between coats. Then apply 2/3 coats of MAKO antifouling at least 12 hours apart
New hulls in fiberglass or plastic. Degrease with detergents and water and rinse. Lightly sand with fine abrasive papers and dust. Apply a coat of EPOFOND AM-9 and after 24 hours sand with fine sandpaper. Then apply with 2/3 coats of MAKO antifouling at least 12 hours apart.
Hulls already painted. - If the old antifouling is in good condition, compatible, and well anchored, it will be sufficient to apply one or two coats of SOLVER PRIMER before overcoating with 2/3 coats of MAKO antifouling at least 12 hours apart
-If the old antifouling is not in good condition, bring the support back to new by removing the residues of the old paint with a scraper or brush and then proceed as recommended for new hulls.
NB: This product is also part of the Skipper's Nautical Line; for further information regarding this sector consult also the complete painting cycles for boats in wood, iron, aluminum or fiberglass, available on request. www.aemmecolori.it
| Shelf life min+10°C max+35°C | 48 months in unopened cans |
| Paint Type | One component |
| Specific gravity kg/lt (±0,05) | 1,730 |
| Solids content (weight) ±2 | 44% |
| Viscosity Ford ø 8 at 20°C ±2 | 14-16 sec |
| Shelf life +23°C (±2) | 24 months in unopened cans |
| Application: by spreading | Ready to use |
| Application: Spray | Ready to use |
| Application | Dilution |
| Dust dry | 60-90 minutes (20c) |
| Recoat time | 6-8 hours (20 ° C) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 50-60 microns per mano |
| Application temperatures | Between + 10 ° C and + 40 ° C |
Colors: NERO CONTENDER
Color code: 3F6613
Colors: BLU UNIVERSO
Color code: B60146
Colors: ROSSO CONTENDER
Color code: 3F6617
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
Seguici su
Tel:
Fax:
Email -
PEC -
© Aemme Colors 2022 - All rights reserved.
Cookie Policy - Privacy Policy