Enamels
Home - Products - Marine Line - Professional Line - Enamels - Sintlac
Sintlac

Sintlac

pdf-icon
Code: D86

Gloss enamel finish, easy to apply, providing good coverage for superstructure of boats and for maintenace works on board of fishing boats and all kinds of boats in general. Recommended application only above the waterline. It is traded at a competitive price offering a good quality finish. Available in a wide range of colours as per colour card.

SURFACE PREPARATION AND APPLICATION SYSTEM

Bare Steel. The substrate should be clean, dry, well degreased and free from any trace of corrosion or calamine. Apply 1-2 coats of EVIOX CROMOMINIO primer and let dry. Overcoat with 2 coats of SINTLAC finish allowing 16-24 hours between coats.

Bare Wood. Apply 1-2 coats of EVIOX CROMOMINIO primer or apply 2 coats direct of SINTLAC finish allowing the required waiting period between coats.

Previously Painted Surfaces:
- If the old paint is in bad conditions, the loose or powdery parts should be mechanically removed. Clean the surface with suitable detergent material and rinse. Let dry thoroughly. Where necessary use SINTOFILLER to fill up and make even any surface irregularity, sand and follow up the directions as per Bare Wood desciberd above.
- If the old paint is in good condition and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), clean, sandpaper and apply 1-2 coats of SINTLAC finish allowing the required waiting period between coats.

Paint Type One component
Binder type A Alkyd
Specific gravity kg/lt (±0,05) 1.230-1.280 depending on the colour
Solids content (volume) ±2 45%
Viscosity Ford ø 8 at 20°C ±2 14 sec.
Shelf life +23°C (±2) 30 months in unopened cans
Application Brush-Roller-Spray
Brush-Roller 5% Thinner 107
Spray 5-10% Thinner 900 or 107
Touch dry 2-4 h (20°c)
Recoat time 24 h (20°c)
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 40 microns per coat
Theoret. coverage m2/Lt 10

Colors: NERO GONDOLA
Color code: D86070

Colors: AZZURRO CIELO
Color code: D86121

Colors: AZZURRO LUMINOSO
Color code: D86124

Colors: BLU OCEANO
Color code: D86122

Colors: VERDE COPERTA
Color code: D86125

Colors: VERDE SMERALDO
Color code: D86126

Colors: VERDE INGLESE
Color code: D86127

Colors: GRIGIO CHIARO
Color code: D86116

Colors: GRIGIO SCURO
Color code: D86117

Colors: GRIGIO MEDIO
Color code: D86119

Colors: ROSSO VIVO
Color code: D86113

Colors: BLU MARINO
Color code: D86142

Colors: MARRONE
Color code: D86108

Colors: BIANCO
Color code: D86080

Colors: GIALLO CROMO
Color code: D86110

Colors: SINTLAC ARANCIO
Color code: D86

Colors: SINTLAC NOCE
Color code: D86

Colors: SINTLAC SABBIA
Color code: D86

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.