Synthetic anticorrosive primer, orange colour, providing good sealing power and rust inhibiting properties. Formulated with synthetic long-oil resins and rust/mildew inhibiting pigments. The product also has good characteristics of flexibility and adhesion on the substrate. For professional use.
SURFACE PREPARATION AND APPLICATION SYSTEM
Bare Steel. If sandblasting cannot be carried out use a mechanical wirebrush or abrasive disk to prepare the surface. The surface to be coated should be clean, dry and degreased; any trace of rust and calamine should be removed. Remove all residuals and dust off the surface. Clean the surface with a cloth soaked with Thinner 107 or Thinner 900. Apply 1 coat of SOTTOFONDO ARANCIO MINIO followed if necessary by a second coat after 24 hours. Overcoat with suitable one-component topcoat.
Previously Coated Steel. if the old paints are not any longer in good conditions because loose or powdery, remove the old paint film mechanically. Remove any trace of rust by mechanical wirebrushing or abrasive disk, sandpaper with medium abrasive paper (280-320) and let dry well. Clean the surface with a cloth soaked with THINNER 107 or THINNER 900. Apply 1 coat of SOTTOFONDO ARANCIO MINIO followed if necessary by a second coat after 24 hours. Overcoat with suitable one-component topcoat.
| Paint Type | One component |
| Binder type A | Alkyd |
| Code & colour A | F30242 Orange |
| Specific gravity kg/lt (±0,05) | 1.550 |
| Viscosity Ford ø 8 at 20°C ±2 | 14 sec. (Ø8 a 20°C) |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Application | Brush-Roller-Spray |
| Brush-Roller | 10-15% Thinner 107 |
| Spray | 15-25% Thinner 900 |
| Touch dry | 3-4 h (20°c) |
| Recoat time | 24 h (20°c) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 40 microns per coat |
| Theoret. coverage m2/Lt | 9 |
Colors: ARANCIO SOTTOF.MIN
Color code: F30242
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
Seguici su
Tel:
Fax:
Email -
PEC -
© Aemme Colors 2022 - All rights reserved.
Cookie Policy - Privacy Policy