Basecoats & Anticorrosive primers
Home - Products - Marine Line - Professional Line - Basecoats & Anticorrosive primers - Sottofondo arancio AT
Sottofondo arancio AT

Sottofondo arancio AT

pdf-icon
Code: 4R5240 Orange

General purpose anticorrosion one component paint formulated with high content of rust inhibitor pigments which give to the product good anti-corrosion and anti-decay characteristics. Recommended in synthetic coating system for long lasting corrosion protection. Easy to apply and fast drying, SOTTOFONDO ARANCIO AT provides a good anchor pattern and high coverage. Widely used in the building, carpentry and boatyard industries.

SURFACE PREPARATION AND APPLICATION SYSTEM

Bare Steel. If sandblasting cannot be carried out use a mechanical wirebrush or abrasive disk to prepare the surface. The surface to be coated should be clean, dry and degreased; any trace of rust should be removed. Remove all residuals and dust off the surface. Clean the surface with a cloth soaked with Thinner 107 or Thinner 900. Apply 1 coat of SOTTOFONDO ARANCIO AT followed if necessary by a second one after 24 hours. Overcoat with suitable one-component topcoat.

Previously Coated Steel. If the old paints are not any longer in good conditions because loose or powdery, remove the old paint film mechanically. Remove any trace of rust by mechanical wirebrushing or abrasiv disk, sandpaper with medium abrasive paper (280-320) and let dry well. Clean the surface with a cloth soaked with Thinner 107 or Thinner 900. Apply 1 coat of SOTTOFONDO ARANCIO AT followed if necessary by a second one after 24 hours. Overcoat with suitable one-component topcoat.

Paint Type One component
Binder type A Alkyd
Code & colour A 4R5240
Specific gravity kg/lt (±0,05) 1.540
Solids content (volume) ±2 54%
Viscosity Ford ø 8 at 20°C ±2 14 sec. (Ø8 a 20°C)
Shelf life +23°C (±2) 30 months in unopened cans
Note Store in a cool and dry place. Do not store at low temperatures.
Application Brush-Roller-Spray
Brush-Roller 15-25% Thinner 107
Spray 15-30% Thinner 900
Touch dry 2-3 h (20°C)
Recoat time 24 h (20°C)
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 40-50 microns per coat
Theoret. coverage m2/Lt 7-9

Colors: ARANCIO
Color code: 4R5240

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.