AM/621 Antiruggine

AM/621 Antiruggine

pdf-icon

Code: 4O / 4N

Anticorrosive basecoat formulated with glycerophtlalic resins and rust-inhibiting pigments of selected quality. Although fast to dry its formulation has been balanced in order to provide a good wetting power to the substrate. Provides good rust-inhibiting properties and good adhesion; recommended as a basecoat to be overcoated with synthetic topcoats. Used in the building field, for carpentry, topsides and upperworks of ships and as a primer in conventional steel coating systems. Available in red or grey colour.

SURFACE PREPARATION AND APPLICATION

Bare Steel
. If sandblasting cannot be carried out use a mechanical wirebrush or abrasive disk to prepare the surface. Remove all sandblasting residuals and dust off the surface. Clean the surface with a cloth soaked with Thinner 107 or Thinner 900. Apply 1 coat of ANTIRUGGINE AM-621 followed by a second one after 24 hours. Overcoat with suitable one-component topcoat.

Previously Coated Steel. if the old paints are not any longer in good conditions because loose or powdery, remove the old paint with a wirebrush or abrasive disk and sandpaper with medium abrasive paper (280-310). Clean the surface with a cloth soaked with THINNER 107 or THINNER 900. Apply 1 coat of ANTIRUGGINE AM-621 followed by a second one after 24 hours. Overcoat with suitable one-component topcoat.

Paint Type One component
Binder type A Alkyd
Code & colour A 4O-Grey 4N-Red
Specific gravity kg/lt (±0,05) 1,520 (Grey) - 1,480 (Red)
Solids content (volume) ±2 70%
Shelf life +23°C (±2) 30 months in unopened cans
Viscosity Ford (Ø4 a 20°C) 160-180 sec.
Application Brush-Roller-Spray
Brush-Roller 15-30% Thinner 107
Spray 15-35% Thinner 900
Touch dry 2-4 h (20°c)
Recoat time 24 h (20°c)
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 40-50 microns per coat
Theoret. coverage m2/Lt 8-9

Colors: ROSSO ANTIRUGG.
Color code: 4N0000

Colors: GRIGIO ANTIRUG.
Color code: 4O0000

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.