Home - Products - Industry Line - Paints - Turapori M/9
Turapori M/9

Turapori M/9

pdf-icon

Code: 6PA000

Nitrocellulose based paint formulated with glycerophtalic resins and special ingredients in order to obtain high filling and levelling properties. Provides good adhesion and a clear film that allows woodgrains to be seen through even at high thicknesses. The wood treated with a single coat of TURAPORI M/9 shows a good filling power and is easy to be sandpapered after a relatively short period. It is recommended as a primer coat in nitrocellulose based coating systems in the furniture industry , for window frames, small carpentry, for the toys and tool industry and for all those applications requirements where a soft and full bodied finish is desired.

SURFACE PREPARATION AND RECOMMENDED COATING SYSTEM
New Wood
. Apply a first coat of TURAPORI M/9 thinned 50% on clean, dry and well seasoned wood. Let dry 2-4 hours, sandpaper with medium grain abrasive paper and overcoat with a second coat of TURAPORI M/9. In the case of particularly absorbing wood a third coat may be necessary. The topcoat finish can be done with nitrocellulose based compatible paints.

Paint Type One component
Binder type A Nitro alkyd
Specific gravity kg/lt (±0,05) 0.960
Solids content (weight) ±2 27%
Viscosity Ford ø 8 at 20°C ±2 120-160 (Ø4 a 20°C)
Shelf life +23°C (±2) 30 months in unopened cans
Viscosity Ford (Ø4 a 20°C) 120-160
Application Airless spray
Sandable After 2-4 hours
Spray Spray 10-20% Nitro Thinner 723 - Airless 5-15% Nitro Thinner 723
Dust dry 10-15 minutes (20c)
Recoat time 1-2 h
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 40 microns per coat
Theoret. coverage m2/Lt 6-7

Colors: INCOLORE
Color code: 6PA000

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.