Home - Products - Industry Line - One component Polish - Silver Lux H.T.
Silver Lux H.T.
Code: 2K0000
Formulated with special resins and leafing aluminium to provide resistance to high temperature, up to 200/300°C. Easy to apply, provides good brushing and flowing properties and performs excellent outdoor resistance. It is applied over chimneys, heating pipes, stoves, boilers, industrial piping (up to 50-60°C) as well as for metal carpentry where a suitable heat resistance and protection properties are required.
SURFACE PREPARATION AND APPLICATION
Bare Steel. Bare Steel. If sandblasting is not
possible, remove all traces of corrosion by mechanical wirebrush or sanding
disk. Dust off, degrease the substrate with Nitro Thinner 107 or 900. Apply 1-2 coats
of suitable anticorrosive primer and let dry. Overcoat with 1-2 coats of
SILVERLUX HT allowing the required waiting time between coats.
Painted Steel. Remove any loose or powdery paint with a scraper and any trace of corrosion with a mechanical wirebrush or sanding disc and sandpaper with medium abrasive paper (280-320). Remove dust and degrease the surface with a cloth soaked with Thinner 107 or 900. Apply one coat of suitable anticorrosive primer on those parts brought back to bare steel and a second coat if required. Overcoat with 1-2 coats of SILVERLUX. HT.
| Paint Type | One component |
| Binder type A | resins silicone |
| Specific gravity kg/lt (±0,05) | 1.00 |
| Solids content (weight) ±2 | 61% |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Viscosity Ford (Ø4 a 20°C) | 40±5 sec. |
| Application | Brush-Roller-Spray |
| Brush-Roller | Ready for use or with max.5% Thinner 107 |
| Spray | 5% Thinner 900 |
| Dust dry | 1-2 hours |
| Recoat time | 24 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 20-25 microns per coat |
| Theoret. coverage m2/Lt | 8-10 |
Colors: ARGENTO
Color code: 2K0000
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
