Home - Products - Industry Line - One component Polish - Artline
Artline
Code: 5N & 5M
Road marking paint formulated for application on cement and for all kinds of road marking requirements. Based on alkyd resin modified with chlorinated rubber provides outstanding wear and abrasion resistance. The titanium dioxide content ensures the required coverage characteristics. When required special glass beads can be added to the product to provide refractive and antiskid properties (according to spec.BS 1851 and 381/C/RS/3262 ). The product is available in white or yellow colour.
SURFACE PREPARATION AND APPLICATION
Cement.
The surface should be dry before proceeding with the application of ARTLINE.
| Paint Type | One component |
| Binder type A | Chlorinated-alkyd |
| Code & colour B | 1.650 White - 1.620 Yellow |
| Specific gravity kg/lt (±0,05) | 1,650 (Bianco) 1,620 (Giallo) |
| Solids content (weight) ±2 | 83% |
| Viscosity Ford ø 8 at 20°C ±2 | 20-22 sec. |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Application | Brush-Roller-Spray |
| Brush-Roller | 10-25% Nitro Thinner 723 |
| Spray | 10-25% Nitro Thinner 723 |
| Dust dry | 15-20 minutes (20c) |
| Recoat time | 12-24 h (20°c) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 50 microns per coat |
| Theoret. coverage m2/Lt | 6-8 |
Colors: BIANCO
Color code: 5N0000
Colors: GIALLO
Color code: 5M0000
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
