Home - Products - Industry Line - Neutral one component Converters - Synthetic Satin Enamel (Binder)
Synthetic Satin Enamel (Binder)
Code: 2GNE00
Satin enamel for wood and steel for interior and exterior use. It should applied on substrates previously prepared with suitable basecoat or old paints in good conditions.
SURFACE PREPARATION AND APPLICATION
Wood, Steel Plasters:
New substrates: Apply a suitable primer, according to the kind of substrate to be coated (anticorrosion primer for steel, sealing varnish for wood or wall sealer for plaster). Overcoat with 2 coats of SYNTHETIC SATIN ENAMEL allowing 24 hours between coats.
Painted substrates: It is recommended that any loose or flaking paint should be removed. Touch up where necessary the bare surfaces with suitable primer. Overcoat with 2 coats of SYNTHETIC SATIN ENAMEL allowing 24 hours between coats.
| Paint Type | One component |
| Binder type A | Alkyd |
| Specific gravity kg/lt (±0,05) | 1.296-1.310 |
| Solids content (weight) ±2 | 73% |
| Viscosity Ford ø 8 at 20°C ±2 | 20-22 sec. Ø8 (20°C) |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Viscosity Ford (Ø4 a 20°C) | 180-210 sec. |
| Application | Brush-Roller-Spray |
| Brush-Roller | 5-15% Thinner 107 |
| Spray | 15-20% Thinner 900 |
| Dust dry | 1-2 hours |
| Recoat time | 18-24 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 40 dry microns |
| Theoret. coverage m2/Lt | 8-10 |
| Colour mixing by weight | 75 parts of Binder with 25 of Colouring pastes (by weight) |
Colors: NEUTRO
Color code: 2GNE00
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
