Two-component epoxy gloss texturized paint activated with poliamide resins providing excellent adhesion onto well prepared metal surfaces. Recommended as a finish coating for machineries and equipment located in industrial indoor areas to withstand severe working conditions. Provides excellent chemical and physical properties as well as abrasion and stress resistance.
SURFACE PREPARATION AND APPLICATION
Steel, iron, galvanized sheet iron
New substrate. Bare substrate should be clean, dry and well seasoned. Onto galvanized sheet iron, the application of one coat od EPOFOND AM-9 primer is recommended. Apply 1-2 coats of GOFFRATO EPOSSIDICO allowing the required waiting time between coats.
Painted surfaces. Remove completely all loose and flaking paint and degrease with solvent. Touch ups bare parts with suitable primer (e.g. EPOFOND AM-9). Apply 1-2 coats of GOFFRATO EPOSSIDICO allowing the required waiting time between coats.
|Paint Type||Two components|
|Binder type A||Polyammide Epoxy|
|Code & colour A||3V...Light colours - 3W.....Strong colours|
|Code & colour B||8ZEPBG|
|Specific gravity kg/lt (±0,05)||1.400 according to colour|
|Solids content (weight) ±2||60%|
|Viscosity Ford ø 8 at 20°C ±2||Thixotropic|
|Shelf life +23°C (±2)||24 months in unopened cans|
|Mixing ratio A+B by weight||100 parts Sol.A with 20 Sol.B|
|Pot life A+B (20°C)||use within 4 hours|
|Spray||Airless: max 5% Thinner 765 (light textured finish)|
|Touch dry||3-4 h (20°c)|
|Recoat time||12-24 h|
|Application temperature||Between +10 C and +40 C|
|Relevant humidity||Less than 80%|
|Dry film thickness advised||70-80 microns per coat|
|Theoret. coverage m2/Lt||5-6|
Colors: TINTE RAL OSSIDI
Color code: 3V0000
Colors: TINTE RAL BASI
Color code: 3W0000
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.