Home - Products - Decorative Line - Stables Line Paints - Sintolin
Sintolin
Code: 2D & 2E
Synthetic enamel for many years expression of the best Aemme tradition, with a good quality-price ratio. Recommended for coating systems where a long lasting and high gloss finish is desired, providing excellent flexibility and outdoor resistance. It is formulated with alkyd resins and pigments of high quality and light stability. Easy to apply Sintolin has excellent brushability and coverage characteristics. Available in a wide range of colors, It can be applied outside and inside on wood and iron surfaces pre.treated with alkyd or chlorinated rubber basecoat.
SURFACE PREPARATION AND RECOMMENDED COATING SYSTEM
Bare Steel. The substrate should be clean, dry and well degreased. Remove trace of corrosion and apply 1 coat of primer (e.g. SOTTOFONDO NAUTICA or EVIOX CROMOMINIO) and let dry. Overcoat with 2 coats of SINTOLIN allowing 24 hours between coats.
Bare Wood. The surface should be clean, dry and well seasoned. If necessary apply one coat of POLIGLASS VARNISH diluted 50-70% or more, or LIGNUM IMPREGNANTE as alternative, without build up a film on the surface. After 24 hours apply 1 coat of SOTTOFONDO NAUTICA. Let dry for 24 hours and overcoat with 2 coats of SINTOLIN allowing 24 hours between coats.
Previously Painted Surfaces.
In poor conditions. Loose or powdery paints should be mechanically removed. Clean the surface well and follow application directions as per bare substrate.
In good conditions. If the old paint is in good condition and it only needs a topcoat because it is dull or dirty but with the underneath coatings still well fixed to the substrate (with no cracks or bubbles), sandpaper and apply 2 coats of SINTOLIN allowing 24 hours between coats.
| Paint Type | One component |
| Binder type A | Long oil alkyd |
| Specific gravity kg/lt (±0,05) | (1.200 White - 1.020 Black) |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Note | Store in a cool and dry place. Do not store at low temperatures. |
| Viscosity Ford (Ø4 a 20°C) | 140-160 |
| Application | Brush-Roller-Spray |
| Brush-Roller | 5% Thinner 107 |
| Spray | 10% Thinner 900 |
| Dust dry | 2 hours |
| Recoat time | 24 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 30-40 microns per coat |
| Theoret. coverage m2/Lt | 12-14 (9-10 m2/kg) |
Colors: BIANCO
Color code: 2D0000
Colors: NERO
Color code: 2DCS99
Colors: PANNA
Color code: 2DCS05
Colors: CIOCCOLATO
Color code: 2DCS11
Colors: ROSSO OX
Color code: 2DCS12
Colors: CANAPA
Color code: 2DCS15
Colors: AVANA
Color code: 2DCS18
Colors: BIANCO GHIACCIO
Color code: 2DCS20
Colors: GRIGIO AUTUNNO
Color code: 2DCS23
Colors: MARRONE
Color code: 2DCS25
Colors: GRIGIO PERLA
Color code: 2DCS26
Colors: GRIGIO PIOMBO
Color code: 2DCS29
Colors: VERDE VITTORIA
Color code: 2DCS38
Colors: VERDE SCURO
Color code: 2DCS39
Colors: VERDE VAGONE
Color code: 2DCS40
Colors: AZZURRO
Color code: 2DCS46
Colors: BLU
Color code: 2DCS48
Colors: GIALLO CROMO
Color code: 2ECS04
Colors: ARAGOSTA
Color code: 2ECS06
Colors: ROSSO AUTO
Color code: 2ECS09
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
