Home - Products - Decorative Line - Stables Line Paints - Lindos
Lindos
Code: 1D0000
LINDOS is a water-based paint formulated with stearine coated extenders. Provides perspiring characteristics and is suitable for any internal area, performing a delicate and smooth finish. Applied outdoor it protects the wall surface from heavy rain thanks to its waterproofing characteristics. When applied outdoor It does wear gruadually, thus avoiding leafing or cracking problems. It can be considered as well a washable paint for interior.
SURFACE PREPARATION AND APPLICATION
Bare walls. The surface should be clean, dry and free from any loosing particles. In case of particular absorbing walls it is recommended that a sealing coat of ISOLFIX or FIXACRIL is applied first, allowing 3-4 hours to dry. Apply 2 coats of LINDOS (slightly more diluted the first coat) allowing the required waiting time between coats.
Painted walls.
In good conditions: If the old paint is still in good conditions just apply 1-2 coats of LINDOS allowing the required waiting time between coats.
In poor conditions: Remove any loose or powdery pre-existing paint by wirebrushing. If necessary apply a sealing coat of ISOLFIX on a dry and clean surface. Apply 2 coats of LINDOS allowing the required waiting time between coats.
| Paint Type | Water-based one-component paint |
| Binder type A | Vinyl versatate |
| Specific gravity kg/lt (±0,05) | 1.650 |
| Solids content (weight) ±2 | 74% |
| Solids content (volume) ±2 | 57% |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Note | Store in a dry and cool place. Do not store at low temperatures. |
| Viscosity Ford (Ø4 a 20°C) | 20.000±2000 cps |
| Application | Brush-Roller-Spray |
| Brush-Roller | 20-40% with water |
| Spray | 20-40% with water |
| Dust dry | 30-40 minutes (20c) |
| Recoat time | min. 6-12 hours |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 40 dry microns |
| Theoret. coverage m2/Lt | 10 |
Colors: BIANCO
Color code: 1D0000
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
