Home - Products - Decorative Line - Stables Line Paints - Lignum Cerato
Lignum Cerato
Code: 6F & 6GC
Wood finish formulated with synthetic resins in and natural wax providing high waterproofing characteristics and maintaining the same features as the LIGNUM IMPREGNANTE version, such as excellent fungicide power, antiwoodworm and anti-mildew protection, weather resistance etc., LIGNUM CERATO performs a long lasting outdoor resistance thanks to its waterproofing characteristics provided by the natural wax used for its formulation. LIGNUM CERATO provides a satin finish, thicker and aesthetically better than other conventional finishes but without building up a film that could be subject to flaking. LIGNUM CERATO in the colourless version when used as a finish has a slightly lower resistance than the colored versions, we therefore recommend the use of the colourless version as a cutting product for the coloured versions or as a finish topcoat on wood previously pre-treated with LIGNUM IMPREGNANTE coloured version.
SURFACE PREPARATION AND RECOMMENDED COATING SYSTEM
New wood. The wood surface should be preferably dry, seasoned and clean. Apply a first coat of LIGNUM IMPREGNANTE in order to seal deeply the pores of the wood. After 24 hours slightly sandpaper the surface. Overcoat with 2 coats of LIGNUM CERATO allowing 24 hours betweeen coats.
Old wood. Clean and wash the surface with a sponge. When the surface is dry sandpaper slightly as much as required by the condition of wood. Apply 1-2 coats of LIGNUM CERATO.
Note: In case of wood surfaces previously painted with transparent varnish, it is recommended to sandpaper very well the surface before the application of LIGNUM CERATO.
| Paint Type | One component |
| Binder type A | Alkyd |
| Specific gravity kg/lt (±0,05) | 0.890 |
| Solids content (weight) ±2 | 38% |
| Shelf life +23°C (±2) | 36 months in unopened cans |
| Note | Keep in a cool, dry place. Do not store at low temperatures. |
| Viscosity Ford (Ø4 a 20°C) | 20 sec. ±3 |
| Application | Brush-Roller-Spray |
| Brush-Roller | Ready for use o if required 5% Thinner 107 |
| Spray | Ready for use or if required 5% Thinner 107 |
| Touch dry | 1-2 h |
| Recoat time | 24 hours (20°C) |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Theoret. coverage m2/Lt | 8-12 depending on wood absorption |
Colors: LIGNUM INCOLORE
Color code: 6F0000
Colors: LIGNUM CASTAGNO
Color code: 6GC204
Colors: LIGNUM NOCE BRUNO
Color code: 6GC203
Colors: LIGNUM NOCE CHIARO
Color code: 6GC202
Colors: LIGNUM QUERCIA
Color code: 6GC201
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
