Home - Products - Decorative Line - Stables Line Paints - Emmecril pls
Emmecril pls
Code: 1K0000
Acrylic plastic coating formulated with fine-quarz for application on wall surfaces. Provides outstanding adhesion to the substrate, excellent weather resistance and a long lasting finish. Easy to apply either by brush or roller performs a smooth, flexible and washable finish. It is recommended for exterior coating of walls.
SURFACE PREPARATION AND APPLICATION
New walls. The surface should be clean, dry and free from any loosing particles. In case of particular absorbing walls it is recommended that a sealing coat of ISOLFIX is applied first, allowing 3-4 hours to dry. Apply 2 coats of EMMECRIL allowing the required waiting time between coats.
Previously Coated Walls. Any loose or powdery old paint should be removed by wirebrushing. If necessary apply on a clean and dry surface a primer coat of ISOLFIX sealer. Overcoat with two coats of EMMECRIL allowing the required waiting period between coats. If the old paint is in good conditions, apply 2 coats of EMMECRIL directly allowing the required waiting period between coats.
| Paint Type | Water-based one-component paint |
| Binder type A | emulsion acrylic |
| Specific gravity kg/lt (±0,05) | 1.700 White |
| Solids content (weight) ±2 | 78% |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Note | Store in a dry and cool place. Do not store at low temperatures. |
| Viscosity Ford (Ø4 a 20°C) | 40.000±3000cps |
| Application | Brush |
| Brush-Roller | -Brush & Smooth Roller : 10-20% with water. - Sponge Roller: (texturized finish) 0-10% with water |
| Touch dry | 1 hour |
| Recoat time | 8-10 hours |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 40-45 microns dry |
| Theoret. coverage m2/Lt | 6-8 |
Colors: BIANCO
Color code: 1K0000
Colors: Colori Pastello
Color code: Colori Pastello
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
