Synthetic satin enamel performing the same outstanding characteristics of the gloss version (Sintolin), such as flexibility, hardness and weather resistance. The pleasant satin finish is achieved through a particular manufacturing process and accurate selection of special matting extenders which do not affect its outdoor resistance. Easily brushed, Sintoseta performs good flowing characteristics giving a soft and smooth finish. Used outdoor on garden furniture, barriers, grids, windows, doors etc. but applied also indoor on wood and steel furniture (e.g. chairs,sofas, beds, shelves etc.).
SURFACE PREPARATION AND APPLICATION
Steel, Wood, Plasters
Bare substrate: The application of a suitable basecoat is recommended (e.g. synthetic anticorrosion primer on steel substrates, clear varnish onto wood or a sealer onto plaster walls). Apply then 2 coats of SINTOSETA allowing 2 hours between coats.
Painted surface. If the old paint is still in good conditions, sandpaper and apply 2 coats of SINTOSETA directly. In case of loose or flaking paint, remove the old coating and apply a suitable basecoat where required. Apply 2 coats of SINTOSETA allowing 24 hours between coats.
Paint Type | One component |
Binder type A | Alkyd |
Specific gravity kg/lt (±0,05) | 1.500 White - 1.360 Black |
Solids content (weight) ±2 | 72% |
Shelf life +23°C (±2) | 30 months in unopened cans |
Note | Store in a cool and dry place. Do not store at low temperatures. |
Viscosity Ford (Ø4 a 20°C) | 180-210 sec. |
Application | Brush-Roller-Spray |
Brush-Roller | 5-10% Thinner 107 |
Spray | 10-15% Thinner 900 |
Dust dry | 2 hours |
Recoat time | 24 h |
Application temperature | Between +10 C and +40 C |
Relevant humidity | Less than 80% |
Dry film thickness advised | 30-40 microns per coat |
Theoret. coverage m2/Lt | 12-14 |
Colors: BIANCO OPACO
Color code: 2G0000
Colors: NERO
Color code: 2GCS99
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.