It is a special paint that thanks to its charachteristics solves the problems of panting “difficults” environments, such as kitchens, restaurants, bars, offices and public places. Although it is a solvent based paint, it is completely odorless and can be applied indoor allowing the immediate use of the painted rooms. The unsightly walls and ceilings of kitchen rooms that are stained or gone yellow due to fumes, smoke and nicotine can be completely covered by the application of NOSMOG without the usual risks that stains will reappair on the surface from underneath. His remarkable penetration onto the surface enables good adhesion even without a particular preparation process. Easy to apply with all available systems does not create sagging. The result achieved is maintained for long time due also to the anti-static properties of its paint film which repels dust. Its solvent vehicle provides outstanding surface washability and allows subsequent detergent cleaning. The pleasant mat finish has been designed to give maximum light refraction in order to get most brightness even in low light environments.
SURFACE PREPARATION AND APPLICATION
New plaster walls. The surface should be sufficiently seasoned and dry. Dust off the surface to remove any loose particles. If required apply a sealing coat of ISOLFIX (water based sealer) or FIXACRIL (solvent based sealer) and let dry for 12 hours. Apply 1-2 coats of NOSMOG MATT as suggested.
Previously painted plaster walls. If the exhisting water-based paint is in good condition and is not loose or powdery, apply 1 or 2 coats of NOSMOG MATT directly. In case the exhisting water-based paint is in poor conditions remove all loose and powdery particles with a scraper and then follow directions as suggested above.
Paint Type | One component |
Binder type A | Acrylic |
Specific gravity kg/lt (±0,05) | 1.560 |
Solids content (weight) ±2 | 77% |
Viscosity Ford ø 8 at 20°C ±2 | 35±5 sec. (Ø8 a 20°C) |
Shelf life +23°C (±2) | 30 months in unopened cans |
Note | Store in a cool and dry place. Do not store at low temperatures. |
Application | Brush-Roller-Spray |
Brush-Roller | 10-20% Thinner 760 |
Spray | 10-30% Thinner 760 |
Dust dry | 1-2 hours |
Recoat time | 6-8 h |
Application temperature | Between +10 C and +40 C |
Relevant humidity | Less than 80% |
Dry film thickness advised | 30-40 dry microns per coat |
Theoret. coverage m2/Lt | 8-10 |
Colors: BIANCO
Color code: 7I0061
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.