Water based clear solution formulated with anti-mould salts for fast and effective results against mould growth. Applied directly over the mould performs a passivating action which removes mould in 24 hours. Recommended for walls affected by mould growth such as rooms affected by high concentration of humidity and condensation or northbound oriented.
SURFACE PREPARATION AND APPLICATION
Walls affected by mould. Apply one coat of LINDOS DFT 16 directly onto the affected area and on the immediate outer areas in order to stop the spreading of growth. Let stand for 24 hours and clean the surface with a wirebrush properly to remove the passivated mould and any loose particles. If necessary, in case of severe mould, repeat the treatment. Once the surface is dry apply one coat of ISOLFIX with 10% of LINDOS DFT 16 added. Let dry 24 hours and apply 2 coats of K.O. or other type of water-based paint, with 5%of LINDOS ADV 70 added, allowing 24 hours between coats.
Paint Type | One component |
Specific gravity kg/lt (±0,05) | 1.000 |
Solids content (weight) ±2 | 2% |
Viscosity Ford ø 8 at 20°C ±2 | 10 sec. |
Shelf life +23°C (±2) | 30 months in unopened cans |
Note | Store in a cool and dry place. Do not store at low temperatures. |
Viscosity Ford (Ø4 a 20°C) | 10 |
Application | Brush-Roller |
Brush-Roller | Ready for use |
Dust dry | 30-60 minutes (20c) |
Recoat time | Once applied let stand for 18-24 h |
Application temperature | Between +10 C and +40 C |
Relevant humidity | Less than 80% |
Theoret. coverage m2/Lt | 8 (depending on absorption) |
Colors: Paglierina
Color code: 6U0000
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.