Recommended on internal or external wall surfaces as insulating primer to provide even absorption for the following coats of paint or as a sealing coat for fixing powdering surfaces and loose particles from the wall. It is compatible with lime and cement and it can be used as a reinforcement to increase adhesion, flexibility and water resistance of concrete lime, plasters or lime based coatings.
SURFACE PREPARATION AND APPLICATION
Plaster, chalk, brick, cement, concrete walls etc. Surfaces to be coated should be perfectly clean, dry and brushed off. Remove mechanically any dirt or loose particles which can be easily removed. Any trace of mildew or grease should be treated with LINDOS DFT 16. After the surface has been adequately prepared apply ISOLFIX diluted with 100 to 500% of water, according to wall absorption.
Paint Type | Water-based one-component paint |
Binder type A | Acrylic |
Specific gravity kg/lt (±0,05) | 1.030 |
Solids content (weight) ±2 | 20% |
Shelf life +23°C (±2) | 30 months in unopened cans |
Note | Store in a cool and dry place. Do not store at low temperatures. |
Viscosity Ford (Ø4 a 20°C) | 15 sec. |
Application | Brush-Roller-Spray |
Brush-Roller | Dilute with min.1 - max 5 parts of water |
Touch dry | 1-2 h |
Recoat time | 4-6 h (with normal latex paints and plastic coatings) |
Application temperature | Between +10 C and +40 C |
Relevant humidity | Less than 80% |
Theoret. coverage m2/Lt | 10-12 depending on absorption |
Colors: TRASPARENTE INCOLORE
Color code: 7G0000
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.