Home - Products - Decorative Line - Decorative Line - Insulation and Special Finishes for Walls - Fixacril Paint
Fixacril Paint
Code: 3D
Solvent based wall paint formulated with metacrylic resins and lightfast pigments providing high weather resistance. It can also be used as intermediate coat and it could be overcoated with water based coatings. It can be applied on cement, plasters and wood panels; particularly recommended in the marine and industrial environments. Provides outstanding adhesion to any wall surface and a waterproof barrier which allow moisture to perspire through the walls. It can also be applied at low temperatures with good stain resistance.
SURFACE PREPARATION AND APPLICATION
New plaster walls. The substrate should be clean sufficiently seasoned and dry. Remove dust and any loose particles. Apply one coat of FIXACRIL TRASPARENTE to get a smoother surface. Allow 12 hours drying and apply 2-3 coats of FIXACRIL PAINT allowing the required waiting time between coats.
Painted plaster walls. Remove any loose or flacking paint by scraping or wirebrushing. Apply 2-3 coats of FIXACRIL PAINT allowing the required waiting time between coats.
| Paint Type | One component water |
| Binder type A | Methacrylic |
| Specific gravity kg/lt (±0,05) | 1.600 |
| Solids content (weight) ±2 | 63% |
| Viscosity Ford ø 8 at 20°C ±2 | 20 sec. (Ø8 a 20°C) |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Note | Store in a cool and dry place. Do not store at low temperatures. |
| Application | Brush-Roller-Spray |
| Brush-Roller | 5-10% Thinner 400 |
| Spray | 10-20% Thinner 400 |
| Touch dry | 2-3 hours |
| Recoat time | Min. 8 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 50 dry microns per coat |
| Theoret. coverage m2/Lt | 9-10 |
Colors: GRIGIO
Color code: 3D0000
Colors: BIANCO
Color code: 3DA000
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
