Home - Products - Decorative Line - Decorative Line - Insulation and Special Finishes for Walls - Fixacril Trasparente
Fixacril Trasparente
Code: 7M0000
Formulated with solvent based metacrylic resins and suitable solvents. Particularly recommended as a sealing and insulating coat on internal and external concrete walls. Performs good protection, increasing adhesion, coverage and resistance of the subsequent coats of paint. It can be satisfactorily used as an anti-dust waterproof finish on cement floors, baked tiles, klincker etc.
SURFACE PREPARATION AND APPLICATION
Cement:
New surfaces. The surface must be perfectly clean, dry and previously brushed off. Apply FIXACRIL TRASPARENTE. The product is supplied ready for use.
Painted surfaces. Remove any flaking or loosing paint. Any trace of mould or grease should be removed with LINDOS DFT 16. Apply FIXACRIL TRASPARENTE. The product is supplied ready for use.
| Paint Type | Water-based one-component paint |
| Binder type A | Acrylic |
| Specific gravity kg/lt (±0,05) | 0.970 |
| Solids content (weight) ±2 | 19% |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Note | Store in a dry and cool place. Do not store at low temperatures. |
| Viscosity Ford (Ø4 a 20°C) | 10-12 sec. |
| Application | Brush-Roller-Spray |
| Brush-Roller | Ready for use |
| Spray | Ready for use |
| Touch dry | 2-3 h |
| Recoat time | 6-8 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Theoret. coverage m2/Lt | 10-12 depending on absorption |
Colors: INCOLORE
Color code: 7M0000
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
