Home - Products - Decorative Line - Decorative Line - Ecological Water Based Line - Ecowood Finish Mat
Ecowood Finish Mat
Code: 6A5790
Clear water based mat finish for wood. Formulated with UV filters to provide excellent weather resistance. Gives waterproofing characteristics, it is non-yellowing and with good mildew resistance. The application of min.2 coats is recommended.
SURFACE PREPARATION AND APPLICATION
Bare wood. The substrate to be coated should be dry, clean and well seasoned. Apply 1 coat of water-based primer. Let dry for 12-24 hours and overcoat with 2 coats of ECOWOOD FINISH OPACO allowing 12 hours drying between coats (room temperature).
Painted wood. If the old paint is in good conditions and it only needs to be renewed, clean and sandpaper the surface and apply 2 coats of ECOWOOD FINISH OPACO allowing 12 hours between coats (room temperature).
| Paint Type | Water-based one-component paint |
| Binder type A | Polyurethane acrylic |
| Specific gravity kg/lt (±0,05) | 1.060 |
| Solids content (weight) ±2 | 46% |
| Shelf life +23°C (±2) | 24 months in unopened cans |
| Note | Store in a cool and dry place. Do not store at low temperatures. |
| Viscosity Ford (Ø4 a 20°C) | 150±10 sec. |
| Application | Brush-Roller-Spray |
| Brush-Roller | Ready for use or with max 5% water |
| Spray | Ready for use or with max 5% water |
| Touch dry | 4-6 h |
| Recoat time | Min. 12 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 30 dry microns |
| Theoret. coverage m2/Lt | 11-12 |
Colors: TRASPARENTE OPACA
Color code: 6A5790
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
