Home - Products - Industry Line - Paints - Spellinx
Spellinx
Code: 6O0000
Solvent based vinyl peelable paint formulated for temporary protection of steel structures which need to be protected from weather exposure for a certain period before being subsequently coated with a permanent painting system and put into service. This product can be easily peeled off the substate to which has been applied.
SURFACE PREPARATION AND APPLICATION
Steel. Apply an adequate quantity of SPELLINX directly onto the substrate in order to provide a suitable dry film for temporary protection. When required peel off the film from the substrate and proceed with the recommended coating system application.
| Paint Type | One component |
| Binder type A | Vynil |
| Specific gravity kg/lt (±0,05) | 0.980 |
| Solids content (weight) ±2 | 27% |
| Viscosity Ford ø 8 at 20°C ±2 | Tixotropico |
| Shelf life +23°C (±2) | 24 months in unopened cans |
| Application | Brush-Roller |
| Brush-Roller | 5-10% Nitro Thinner 723 |
| Spray | 10-20% Nitro Thinner 723 |
| Dust dry | 10-15 minutes (20c) |
| Recoat time | 8-10 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 50-60 microns per coat |
| Theoret. coverage m2/Lt | 4 |
Colors: BLU
Color code: 6O0000
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
