Home - Products - Industry Line - Neutral bi-component Converters - Gloss polyurethane enamel
Gloss polyurethane enamel
Code: 4ANE00
Two component gloss polyurethane enamel for steel, aluminium and wood surfaces applied over a suitable basecoat. Provides suitable resistance in aggressive environment.
SURFACE PREPARATION AND APPLICATION
Steel. The application of a suitable primer such as EPOFOND AM-9 is required. The primer should be dry and well anchored to the substrate. Apply 1-2 coats of GLOSS POLYURETHANE ENAMEL allowing the required waiting time between coats.
| Paint Type | Two components |
| Binder type A | Poliurethane |
| Code & colour A | 4A....Ossidi - 4B....Basi |
| Code & colour B | 8ZPOLI (Aromatico) - 8ZPOLE (Alifatico non-ingiallente) |
| Specific gravity kg/lt (±0,05) | 1.020 (A) - 1.030 (B) |
| Solids content (weight) ±2 | 56% |
| Viscosity Ford ø 8 at 20°C ±2 | 120-150 secondi (Ø4 a 20°C) |
| Shelf life +23°C (±2) | 24 months in unopened cans |
| Note | * cod-8ZPOLI (Standard activator) - cod. 8ZPOLE (Non-yeallowing activator) |
| Viscosity Ford (Ø4 a 20°C) | 120-150 |
| Application | Brush-Roller-Spray |
| Mixing ratio A+B by weight | 100 parts Sol.A (Neutral base + Colourants) with 40 Sol.B * |
| Pot life A+B (20°C) | use within 4 hours |
| Brush-Roller | 5-10% Thinner 205 (touch up only) |
| Spray | 10-15% Thinner 203 |
| Recoat time | 8-12 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 40 microns per coat |
| Theoret. coverage m2/Lt | 6-7 m2/Kg |
| Colour mixing by weight | 65 parts of Neutral base with 35 parts of Colourants |
Colors: NEUTRO
Color code: 4ANE00
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
