Home - Products - Industry Line - Neutral bi-component Converters - Epoxy gloss enamel
Epoxy gloss enamel
Code: 3PNE00
FOR TINTING SYSTEM USE. Two-component epoxy gloss enamel for application on steel, aluminium and cement surfaces previously coated with suitable epoxy primer. Provides outstanding resistance to corrosion and to several solutions such as solvent, acid, oils etc.
SURFACE PREPARATION AND APPLICATION
Bare steel. Sandblasting according to SA 2,5 or application of a suitable primer is requested. Apply 1-2 coats of EPOXY GLOSS ENAMEL.
Painted steel. Any loose or flaking old paint should be removed. Degrease with solvent and apply one coat of suitable primer onto bae surfaces. Allow to dry and overcoat with 1-2 coats of EPOFLEX S.L. If the old paint is in sound conditions just overcoat with 1-2 coats of EPOXY GLOSS ENAMEL. If the old paint is still in good conditions of adhesion and compatible, in that case sandpaper and apply directly 1-2 coats of EPOXY GLOSS ENAMEL.
Bare wood. Apply a suitable primer first and then 1-2 coats of EPOXY GLOSS ENAMEL, allowing the required waiting period between coats.
Concrete. All surfaces should be clean, dry and free from dirt or loosing particles. Apply a suitable basecoat (e.g. EPOFOND AM-9) and overcoat with 1-2 coats of EPOXY GLOSS ENAMEL.
| Paint Type | Two components |
| Binder type A | Polyammide Epoxy |
| Code & colour B | 8ZEPUV or 8Z3692 |
| Specific gravity kg/lt (±0,05) | 1.150 (A) - 0,980 (B) |
| Shelf life +23°C (±2) | 30 months in unopened cans |
| Viscosity Ford (Ø4 a 20°C) | 120-180 sec. A+B |
| Application | Brush-Roller-Spray |
| Mixing ratio A+B by weight | 100 parts Sol.A with 20 Sol.B (8Z3692) or 40 Sol.B (8ZEPUV) |
| Pot life A+B (20°C) | use within 4 hours |
| Temperature Pot Life | 20°c |
| Brush-Roller | 5-10% Thinner 765 |
| Spray | 10-20% Thinner 765 |
| Touch dry | 4-6 h |
| Recoat time | 16-24 h |
| Application temperature | Between +10 C and +40 C |
| Relevant humidity | Less than 80% |
| Dry film thickness advised | 50 dry microns per coat |
| Theoret. coverage m2/Lt | 5-6 m2/Kg |
| Colour mixing by weight | 70 parts of Neutral Base + 30 parts of Colourants |
Colors: NEUTRO
Color code: 3PNE00
SAFETY PRECAUTIONS
Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.
NOTES
The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.
