Home - Products - Anticorrosion Line - Primer LBE 100
Primer LBE 100

Primer LBE 100

pdf-icon

Code: 3P6074 / 3P6938

It is a single-pack primer formulated with epoxy and amine resins, oven-drying at temperatures between 140 and 180°C. It can be applied both by o-ring method and by side-band method for the 3-layer system polyethylene external coating of 8 to 56 inch pipes.Provides outstanding resistance to cathodic disbonding and excellent adhesion for the following coats with remarkable chemical-physical characteristics. LBE 100 is a self-curing product and since it does not need refrigerated storage it can be stored at room temperature.

SURFACE PREPARATION AND APPLICATION

Applied on grit-blasted steel pipes prepared to SA 2,5 in accordance with BS 7079 part A1 or equivalent.  Supplied ready for use for heated application. Can be thinned with a max. of 5% M.E.K. where heated application is not possible.

 

Paint Type One component
Binder type A Polyammide Epoxy
Code & colour A 3P6074 Black 3P6938 Red oxide
Specific gravity kg/lt (±0,05) 1.60
Solids content (weight) ±2 99%
Solids content (volume) ±2 98%
Shelf life (+10+30°C) 12 months in airtight cans
Viscosity Ford (Ø4 a 20°C) 40.000±5.000 CPS Bucholz:hardness 125
Spatula Ready to use
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 25-100 dry microns
Theoret. coverage m2/Lt 35-40 m2/LT for 25 dry microns or 9-10 m2/LT ffor 100 dry microns
Application temperatures In line drying: pre-heating at 140-180°C, depending on application requirements

Colors: nero lbe
Color code: 3P6074

Colors: Rosso ossido
Color code:

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.