Home - Products - Anticorrosion Line - Epofind AM/Surtol 8048
Epofind AM/Surtol 8048

Epofind AM/Surtol 8048

pdf-icon

Code: 2P3996

Two component high thickness epoxy coating suitable for application on surfaces not adequately prepared. Combines excellent wetting characteristics with outstanding adhesion and waterproof properties.

“SURFACE TOLLERANT” TWO COMPONENT EPOXY COATING
Two component high thickness epoxy coating specifically formulated for application over steel surfaces  where abrasive blasting is not possibile. Provides a high solids, waterproof, insulating protection with excellent adhesion even onto damp surfaces and on areas manually prepared (wirebrushed).
The combination of anticorrosive wetting pigments and selected resins provides an excellent barrier against corrosion in any sort of environment. It may be used as a high solids primer  or as a high solids self-adhesive topcoat with long lasting resistance to most severe atmospheric agents.

Paint Type Two components
Binder type A Polyammide Epoxy
Binder type B Amminic
Solids content (volume) ±2 90%
Viscosity Ford ø 8 at 20°C ±2 Thixotropic
Shelf life (+10+30°C) 12 months in airtight cans
Application Brush-Roller-Spray
Mixing ratio A+B by volume 1 part sol.A with 1 Sol.B
Brush-Roller 10-15% Thinner 765
Spray 10-20% Thinner 765
Touch dry Touch dry in 6h, Dry in 24h
Recoat time Min.16h max. 72h
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 100-125 dry microns per coat
Theoret. coverage m2/Lt 5-7 m2/lt

Colors: ROSSO OX
Color code: 2P3996

Colors: ARGENTO
Color code: 2P0000

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.