Home - Products - Anticorrosion Line - Epofind AM/16 W
Epofind AM/16 W

Epofind AM/16 W

pdf-icon

Code: 5G6534

Two component epoxy coating for immersion service in acquous solutions up to 120°C of continuous temperature. Specifically formulated for internal pipe coating for desalinisation plants.

TWO-COMPONENT EPOXY COATING WITHSTANDING HIGH TEMPERATURE 
Two component epoxy coating specifically formulated for application on internal pipelines and
tanks carrying acquous solutions of different kinds, hot solutions up to 120°C 
This coating withstands to continuous temperatures in immersion conditions up to 120°C
Provides excellent adhesion to the substrate, outstanding resistance to corrosion and to service
temperatures. Particularly recommended for the protection of structures and  pipelines for
desalinisation plants.

Paint Type Two components
Binder type A Polyammide Epoxy
Binder type B Amminic
Solids content (volume) ±2 50%
Viscosity Ford ø 8 at 20°C ±2 Thixotropic
Shelf life (+10+30°C) 12 months in airtight cans
Application Brush-Roller-Spray
Mixing ratio A+B by volume 4 parts of sol.A with 1 of Sol.B
Brush-Roller 10-15% Thinner 765
Spray 10-20% Thinner 765
Touch dry Touch dry: 4h Dry: 16h
Application temperature Between +10 C and +40 C
Relevant humidity Less than 80%
Dry film thickness advised 50-75 dry microns per coat
Theoret. coverage m2/Lt 7-10 m2/l

Colors: ROSSO OX
Color code: 5G6534

SAFETY PRECAUTIONS

Before starting paint application please carefully read all the safety precautions indicated on the label of each can or in the product safety data sheet available on request. For further information please do not hesitate to contact our technical staff.



NOTES

The above information is given to the best of our current knowledge, however, because the conditions of use of our products are beyond our control, no warranty is given or to be implied in respect of such information. Our technical staff can be contacted to study customer's specific requirements involving our products in order to enable their most effective use. Dilution rates and drying times must be considered only indicative, mainly related to a temperature of 20 ° C (68°F) and may vary according to prevailing temperature, in presence of particular weather conditions or depending on application procedures.